Ajax is the alarm system we install for homes, lodges, farms and commercial sites. Everything talks to one hub over Ajax's own radio protocol, so there is no cabling to pull, and the app tells you what happened, with a photo where the detector has a camera, rather than just that something did.
Beyond was part of the MBIE fog cannon installation programme, one of the first commercial Ajax deployments in New Zealand, and remains one of a handful of commercial Ajax installers in the country. We supply the gear, install it, connect monitoring and look after it.
No prices are shown here. Build a quote and we price it for your job, or sign in for trade pricing. Specifications and product photos are from Ajax Systems; follow a product's link for the full sheet.
Not sure what you need?
Send us a floor plan and we build a 3D walkthrough with every device placed. You get the right gear for the space and nothing you do not need, then a quote straight from the plan.
Plan it with usHubs
The brain of the system. One per site; it talks to every device and to the app.
Hub (4G) Jeweller
Entry level control panel for up to 100 wireless Jeweller devices.
Two communication channels: Ethernet and cellular (LTE SIM on the 4G version) · Up to 100 wireless devices, 50 users and 9 security groups
Hub 2 (4G) Jeweller
Control panel with photo verification and three communication channels.
Three independent communication channels: Ethernet plus 2G and 4G (LTE) cellular · Up to 100 devices, including up to 5 range extenders and 25 video cameras
Hub 2 Plus Jeweller
Advanced control panel with four communication channels for larger sites.
Four communication channels: Ethernet, Wi-Fi and two SIM cards with LTE support · Up to 200 devices, 200 users, 25 security groups and 64 scenarios
Superior Hub Hybrid (4G)
Hybrid control panel that runs wired Fibra and wireless Jeweller devices.
Ethernet plus two SIM cards; the 4G version supports 2G, 3G and 4G (LTE) · Up to 8 Fibra wired lines; up to 100 wired or wireless devices per system
Motion detectors
Indoor detectors that see movement, some with a camera to show you what set them off.
CombiProtect Jeweller
Motion and glass break detection in one device.
Motion detection up to 12 m; glass break detection up to 9 m across 180 degrees · Ignores pets up to 20 kg and under 50 cm tall
MotionCam (PhOD) Jeweller
MotionCam with photo on demand and photo by scenario.
Motion detection up to 12 m; first photo in 9 seconds at default settings · Photo on demand and photo by scenario, disabled by default
MotionCam Jeweller
Motion detector with a camera that photographs the cause of an alarm.
Motion detection up to 12 m; first photo delivered in 9 seconds at default settings · Photo resolution 320 x 240 px by default; HDR and infrared backlight for low light
MotionProtect Curtain Jeweller
Narrow beam indoor detector for windows, doors and valuables.
Detects motion at a range of up to 15 m · Two PIR sensors with a multifaceted mirror optical system
MotionProtect Jeweller
Wireless indoor PIR motion detector with pet immunity.
Motion detection up to 12 m, horizontal viewing angle 88.5 degrees · Ignores animals up to 20 kg and under 50 cm tall when installed correctly
MotionProtect Plus Jeweller
Dual technology motion detector with PIR and microwave sensors.
Motion detection up to 12 m · K-band microwave sensor verifies PIR alarms
Door, window and glass
Know the moment a door or window opens or a pane breaks.
DoorProtect Jeweller
Wireless opening detector for doors, windows and skylights.
Large magnet works at gaps up to 2 cm, small magnet up to 1 cm · Reed switch rated for over 2 million openings
DoorProtect Plus Jeweller
Opening detector that also senses shock and tilt.
Reed switch plus accelerometer for shock and tilt detection · Three shock sensitivity levels; tilt angle adjustable from 5 to 25 degrees
GlassProtect Jeweller
Acoustic glass break detector with two stage analysis.
Glass break detection up to 9 m across 180 degrees · DualTone two stage detection within a 1.5 second window
Outdoor protection
Catch someone on the property before they reach the building.
Curtain Outdoor Jeweller
Narrow beam outdoor curtain detector with PIR and microwave sensors.
Adjustable range up to 12 m; horizontal viewing angle 8 degrees · Two PIR sensors plus one K-band microwave sensor
DualCurtain Outdoor Jeweller
Two sided outdoor curtain detector for property boundaries.
Up to 15 m per optical system, 30 m in total, adjustable · Two PIR sensors per side; both must detect movement to alarm
MotionCam Outdoor Jeweller
Outdoor motion detector with a camera to verify alarms.
Detection range set manually from 3 to 15 m · Series of 2 to 5 photos per alarm; first photo in 9 seconds
MotionProtect Outdoor Jeweller
Outdoor motion detector with anti-masking and pet immunity.
Detection range adjustable from 3 to 15 m · Two PIR sensors; anti-masking runs around the clock
Fire
Smoke, heat and carbon monoxide, with the alarm sent to your phone as well as sounded.
FireProtect 2 (Heat/Smoke) Jeweller
Wireless heat and smoke detector for homes.
Dual spectrum optical smoke sensor in a dustproof, insect resistant chamber · Two A1R class thermistors; alarms at 64 C or a rise of more than 10 C per minute
FireProtect 2 (Heat/Smoke/CO) Jeweller
Wireless fire detector with heat, smoke and carbon monoxide sensors.
Dual spectrum optical smoke sensor with blue and infrared LEDs and a dustproof chamber · Two A1R class thermistors; alarms at 64 C or a rise of more than 10 C per minute
Leaks
A sensor under the sink or by the hot water cylinder beats a wet floor.
LeaksProtect Jeweller
Wireless water leak detector that sits on the floor.
Contact pairs on all four sides detect water from any direction · Up to 5 years on pre-installed batteries
Sirens
Indoor and outdoor sirens that make an intruder leave and tell the street.
HomeSiren Jeweller
Wireless indoor siren that also shows system status.
Three volume levels from 80 to 98 dB · Alarm duration adjustable from 3 seconds to 3 minutes, or up to 15 minutes on newer firmware
StreetSiren DoubleDeck Jeweller
Outdoor siren with a clip on Brandplate for your company branding.
Volume adjustable from 85 to 113 dB · Up to 5 years on pre-installed CR123A batteries; can connect to a 12 V supply
StreetSiren Jeweller
Loud wireless siren with an LED frame for outdoor or indoor use.
Volume adjustable from 85 to 113 dB at 1 m; silent LED only mode available · Up to 5 years on pre-installed CR123A batteries; terminals for external power
Keypads and control
Arm and disarm from a keypad, a fob, a card or the app.
Button Jeweller
Small wireless button for panic alerts or automation control.
Three modes: panic, control and mute fire alarm · Up to 5 years on the pre-installed battery
DoubleButton Jeweller
Two button hold-up device that resists accidental presses.
Both buttons must be pressed simultaneously to alarm; a plastic barrier separates them · Confirmed alarm sequences using one or two devices
KeyPad Jeweller
Wireless touch keypad for arming and disarming by code.
Up to 99 access codes for people not registered in the system (depends on hub model) · Duress code and lockout after too many wrong codes
KeyPad Plus Jeweller
Touch keypad that accepts codes, Tag key fobs and Pass cards.
Reads Pass cards and Tag fobs with DESFire chips (ISO 14443, 128 bit encryption) · Personal codes for up to 200 users and codes for up to 99 unregistered users (depends on hub model)
KeyPad TouchScreen Jeweller
Touch screen keypad with Bluetooth, Tag, Pass and code access.
5 inch IPS touch screen, 480 x 854 px, with automatic brightness and dark and light themes · Bluetooth Low Energy smartphone reader plus DESFire Tag and Pass reader
SpaceControl Jeweller
Four button key fob to arm, disarm and call for help.
Four buttons: arm, disarm, panic and a programmable service button · Pre-installed battery lasts up to 5 years
Automation
Switch lights, gates and appliances from the same app, or on a schedule.
LightSwitch (1-gang) Jeweller
Touch sensitive smart light switch that needs no neutral wire.
Controls lighting loads from 5 to 600 W · No neutral connection needed
MultiTransmitter Jeweller
Connects up to 18 wired third party detectors to an Ajax hub.
18 wired zones supporting NO, NC, EOL, 2EOL and 3EOL contacts · 12 V DC output, up to 1 A in total for connected detectors
Relay Jeweller
Dry contact relay for gates, locks and low voltage gear.
Dry contact, galvanically isolated from the relay's own power supply · Powered from 7 to 24 V DC; shuts off below 6.5 V or above 36.5 V
Socket (type F) Jeweller
Smart plug with power monitoring and overload protection.
Maximum load up to 2.5 kW · Power consumption monitoring; standby draw under 1 W
WallSwitch Jeweller
Hidden 230 V power relay with consumption monitoring.
Switches 110 V or 230 V AC, maximum load 3 kW · Power consumption shown in the Ajax app
Cameras and recording
Ajax cameras and recorders that live in the same app as the alarm.
DomeCam Mini
Compact wired AI dome camera for ceilings and eaves.
5 MP (2880 x 1620) or 8 MP (3840 x 2160) resolution · 2.8 mm lens (100 to 110 degree view) or 4 mm lens (75 to 85 degree view)
Range extenders
For large homes, sheds and multi building sites.
ReX 2 Jeweller
Range extender that carries alarms and photos over Jeweller and Wings.
Jeweller and Wings two-way radio; up to 1,700 m to the hub and up to 1,700 m to detectors · Up to 5 range extenders per system for coverage up to 35 km2
ReX Jeweller
Wireless Jeweller range extender for larger sites.
Two-way Jeweller radio, up to 1,800 m to the hub depending on hub model · Up to 5 ReX units per system, extending coverage to 35 km2
